显示标签为“ladle castable”的博文。显示所有博文
显示标签为“ladle castable”的博文。显示所有博文

2014年5月29日星期四

Used for blast furnace lining in castable refractory material. It is a kind of containing silicon carbide and carbon of high alumina castable. Trough the castable lining was developed in the late twentieth Century 70 a new unshaped refractory materials, with the iron quantity, long service life, low consumption of refractory material, convenient construction etc...

Trough castables is mainly composed of high alumina, silicon carbide, carbonmaterials and binder prepared.

High alumina raw materials: the use of electric melting or sintering corundum spinel, bauxite clinker in one or two.

Silicon carbide materials: can choose one grade or two grade black silicon carbide.

Carbonaceous materials: the use of asphalt, coke, graphite or electrode powdered..

Binder: the clay, good dispersion of oxides or ultrafine powder and pure calcium aluminate cement.

Technical features: iron trough castable trench lining in repair without dismantling old lining, in the clear old lining surface residue and residual iron can be carried out after repair of casting, the old and the new ditch lining has good binding capacity, compared with the ramming material, waste is reduced by more than 50%, after repeated feeding, the total amount of iron. Up to 30 ~ 1000000t

2014年5月28日星期三

Prospects of refractory castable products

Refractory castable as a very practical refractory material, it is very important in the status of the industry, at the same time, in our country also cannot lack the existence of this product, and now with the development of our country more and more quickly, need of castable refractory industry is also growing, so that the production of domestic enterprises have been constantly emerging.
So from this we should be able to predict, in the future this kind of refractory products in the market is affected by many users and consumers and other industry's attention, but also bring great use for the development of our country.

Nowadays with the rapid development of refractory castable, many new species are also in the constant increase, but this does not mean that the quality of the products is not guaranteed, but with the increase in varieties, the quality of the products also increased, many more new refractory raw materials have also been developed. My company is a very advanced technology enterprises, and many years of production experience, is worthy of the trust of the people, but also very quality assurance. If people want to have the quality and safety assurance of castable refractory products, welcome to our company for purchase.


Now that the castable refractories market so well, so my company in the market prospects will be very broad, when people focus on the industry and the products of the enterprise, we will let consumers with special respect.

2014年5月27日星期二

How to shorten the unshaped refractory construction time

We know that usually heat treatment equipment (furnace) maintenance time is long, the entire construction time ordinary unshaped refractory takes a long time, which greatly affect the normal production of the enterprise, reduce the production efficiency. In order to solve this problem, Luoyang Yilong Refractories Co.,Ltd think of the following methods:

1.     We can add the composite explosion-proof agent of high explosion-proof performance;


2.     Add the compound water reducing agent to improve the operating performance, the main purpose is to reduce the amount of water, so that the material containing low content, decrease the burst risk in the process of drying;

3.    Using phosphate as binder, the curing time is faster than the cement, rapid hardening to achieve.


Through the above ways to resolve the construction time of heating furnace, the castable short construction time, baking temperature quickly, long service life, release time of only about 4h, and the drying time is shortened to 1-2 days, and conventional castables for 5-7 days compared to oven baking time, saving more than 3 days, can win the valuable production time enterprise.

2014年4月17日星期四

Several species of castable

   Castable consists of aggregate, binder and admixtures. Depending on the binders can be divided into Portland cement castable, aluminate cement castable, castable sodium silicate, phosphate castable refractory concrete and clay combined with magnesia refractory castable.


   Portland cement castable concrete binder weight accounted for 7% -20%. Portland cement castable cementitious material used, the need to eliminate the role of calcium oxide. When the addition of 50% -100% by weight of cement of clinker fine clay powder as admixture, it combines with calcium oxide and aluminum to form a stable calcium silicate minerals. This refractory concrete stick low cost, available at the following 1000 ℃, temperature fluctuation is not, no acid erosion in places such as basic equipment, flues, chimneys, etc.
Aluminate cement castable based on alumina as binder to bauxite clinker as aggregate and blending material made ​​of hydraulic concrete. The main mineral bauxite is calcium aluminate cement hydration fast. Therefore, this concrete hardening, high early strength.

   Water glass castable is a water glass binder and add the appropriate amount of sodium silicon fluoride gas as hard concrete coagulant made​​. Silicone silicate hydrolysis of the aggregate, admixtures together. This concrete strength is relatively high, but the low refractoriness and load softening point, applies to the following 1000 ℃ require a higher strength, wear resistance, corrosion can antacid site, but not for regular water or water vapor effect place.

   
Phosphate castable based on industrial phosphoric acid binder, sometimes plus the amount of alumina cement as a coagulant and made of hot hard concrete. This is characteristic of concrete cured at room temperature without consolidation, in order to solidify and a certain intensity, to add coagulant. Was heated to 500 ℃ hardened consolidation, and the strength will be improved, but near 800 ℃, low temperature strength of its shortcomings, and strength after the temperature rise. This refractory concrete has excellent fire resistance, abrasion resistance, slag resistance and thermal shock resistance, long-term use under the conditions of 1400-1600 ℃.


   The casting material can be poured directly on the thermal equipment templates, add anchors inside after tamping after a certain curing period can be. Can also be made of prefabricated blocks, such as the vault, ceiling, wall oven, lid, door, etc., than the brick or directly casted, both during construction and replacement much more convenient.

2014年4月16日星期三

U.S. levy anti-dumping taxes on China Refractories

U.S. Department of Commerce preliminary ruling made ​​by the first half of last year, China's exports to the U.S. decision to impose refractories ~ 91.16% 84.89% anti-dumping duty. The U.S. Commerce Department's announcement that day showed specific products being taxed at least 90% of silica containing silica brick.
This acid refractory is mainly used for masonry coke ovens, blast furnaces, glass kilns and other high-temperature furnaces.

Chinese exports to the U.S. silica brick case began in November 2012. Utah, a refractory company complaint, claiming that Chinese companies of dumping in the United States, asked the U.S. Department of Commerce initiated anti-dumping investigation, the dumping margin was made ​​up 118.47% ~ 290.12%.

U.S. Department of Commerce statistics show that in 2011 Chinese exports to the U.S. totaled about $43,240,000 silica brick, but in 2012 the total value of exports to the U.S. fell to $25.7 million sharply, a decline of nearly 40%.


For the United States frequently waving "trade stick", Chinese Ministry of Commerce has repeatedly stressed that trade protectionism is not only unfair to him, the country, there is no advantage to domestic companies, do not want the United States to measure high-sounding but actually with a strong political background to implementation of trade protectionism, but should abide by its commitment to oppose trade protectionism, with a more rational approach to properly handle trade frictions

2014年4月14日星期一

Foreign refractory recycling situation

Developed countries attach great importance to the re-use of refractories from resources, environmental protection height to understand, even with the development of laws and regulations strictly limit emissions after the refractory, which greatly promoted the study of the refractory recycling after refractory recycling rate has reached more than 60% and rising.

Japan to scrap steel slabs based raw materials, developed around the bottom of the ladle ramming mixes, ladle castable and styling products, such as: with 85% recycled material and 15% of new material to produce a molten pool area with no burning furnace brick, with 90% recycled material and 10% new material to produce electricity lines slag MgO-C, as well as all recycled materials to produce RH bottom burned magnesia chrome brick. Secondary use of technology Kashima Steel has developed a skateboard brick, using surface grinding, pouring castable recovery method, the Mosaic law makes skateboard ring after the repair has reached a new skateboard using the same effect; scrap iron ditch refractories are repeated use, primarily as A12O3-SiC-C castable aggregate.

Italian company has developed a method for recovering the refractory technology, mainly used for recycling of the furnace , tundish , ladle ingot mold and the refractory lining , and the recovered blowing directly into the furnace refractories to protect the furnace wall . American Refractories previously only a small amount of waste recycled , the rest almost completely buried. 1998 U.S. Department of Energy , Department of Industrial Technology and steel producers jointly developed a three-year plan to extend the life of refractories and refractory waste recycling .Refractory Factory cooperation with users to minimize the amount of the waste refractories . The United States also after dolomite brick as a soil conditioner and slagging agents were studied , and achieved good results.

India conducted the first study of waste refractories can be traced back to 1978, first in the steel company to carry out, the use of Indian steel company (now known as TISCO steel Branch) high alumina brick furnace waste generated (60% to 62% aluminum) production castable (56% alumina), fire clay (50% alumina) and fire-resistant plastic. Developed material which is mainly used for the production of cast burner tiles, dampers, tiles, etc., and can meet the requirements within the industry.