Acceptance of clay refractory brick

Acceptance of fireclay brick works, to carefully check the flue; furnace stare in the firebrick, particular attention should be paid to the vault, single arch, the bottom of the device. The next small series will give you a detailed introduction:
1, in masonry clay refractory brick, the use of refractory materials and mud, according to thegrade, etc., the ingredients and level must be consistent with technical conditions and drawings;
2, to ensure the good quality of masonry fireclay bricks, also is to follow the wrong sewing, levelness and verticality, the mortar joint thickness corresponding to a standard, size and drawings with.
3, in the process of acceptance of the furnace body, the assigned responsible for the assistant director of the workshop must personally from above, according to each part of the examination of the furnace body, a few gray seam thickness inspection, the size of the measurement according to the approval certificate of admission furnace body parts, carefully check the furnace body of many important structure of masonry.
The above is the acceptance of the acceptance of the clay refractory brick, for your reference, and hope that you will help, if you need to buy, please contact us!

Brick size selection guide

There are a lot of people in the furnace construction and repair, for the use of what kind of refractory brick is a fog, the reason is very simple is because there are too many types of refractory brick, if is the standard types of refractory brick is still relatively good procurement, if special-shaped firebrick to want to find they need models, it is not easy, below I sales firebrick of 10 years of experience in the explain refractory brick how to choose!

Buy Bricks should first look at a simple type of refractory bricks, refractory bricks GB main models:

T-3 size: 230mmx114mmx65mm

T-38 size: 230mmx114mmx65/55mm

T-39 size: 230mmx114mmx65/45mm

T-19 size: 230mmx65/55mmx114mm

T-20 size: 230mmx65/45mmx114mm

Brick half pieces: size: 230mmx114mmx30mm

Five pieces of flat brick: size: 570mmx230mmx65mm

Above refractory brick is the most commonly used types and GB, there are several refractory brick types such as: half gold bars, seven separately, camber angle of refractory brick, flat six medals, etc., in furnace construction are long used.

The count of refractory bricks in the boiler construction and how to use, repair or construction of flue, firewall must be used refractory brick is T-3 refractory brick, the brick also called standard brick, masonry arch kiln or furnace in circular or door is refractory bricks must be used is T-38, T-39, T-19, T-20, this is not to be used in several kinds of refractory bricks, but 1-2 can be selected according to the size of the diameter of the furnace, used brick half pieces to stove in the kitchen equipment in the flue, the refractory brick in the construction, Roasted Duck furnace is to use large brick flat five, flat six, the above is only a few commonly used refractory brick the shopping guide, do a simple introduction, if unknown place, can call the toll free telephone consultation or contact us ‘http://www.chinafirebrick.com’.