Damage reason of refractory

According to the specific conditions of various furnaces and thermal equipment, proper selection and application of refractory material is very necessary. It is to improve the service life of the kiln and thermo technical equipment, reduce maintenance time, reducing the consumption of refractory material and energy, improve furnace production and guarantee the quality of the products and reduce the cost of production plays an important role.

As is known to all, there will be some damage reasons for different kinds of kilns or thermal equipment under different working conditions. Even in different parts of the same furnace or thermal equipment. There are many factors that affect the damage of refractory materials:

(1) The use of the temperature is too high, exceeding the limit temperature of the refractory;

(2) The temperature changes in temperature, refractory material damage in blast crisis;

(3) The refractories by slag furnace, mechanical shock or friction and wear serious the damage;

(4) The refractory material is damaged by the high temperature physical and chemical erosion and penetration of the molten metal, slag and furnace gas;

(5) The thermal stress and the weight of the heat generated by the heat of the refractory material cause damage to the stress concentration and the volume effect.

The above factors are not isolated, only to find out the main influencing factors in order to correct selection of refractory materials.

Insulation materials used in power plant

Thermal insulation refractory material in the electric power industry especially thermal power plants, such as coal-fired power plants occupies an important position. It has energy saving, reduce heat loss, to meet the requirements of the power plant production process, ensure theequipment, production and personal safety, improve the environment, improve the economic benefit, is an important part of the construction of power plants. So the power plant is commonly used in the refractory material is light heat insulation brick. According to the present and future development, electric power industry of insulating refractory material demand quantity big, more varieties, high quality requirements, which the fiber insulation refractoriness demand maximum, followed by hard material, and is lightweight materials and thermal insulation coating.

One, according to the various parts of the heat preservation refractory materials of the insulation requirements of choice

(1) The medium temperature of the equipment and the pipeline at 350~600 is chosen to use calcium silicate products, aluminum silicate composite insulation;

(2) with rock, mineral wool products such as insulation equipment and piping medium temperature less than 350 DEG c;

(3) The valve, elbow and other special-shaped pieces of light insulation material or heat preservation coating insulation;

(4) The use of ordinary aluminum silicate fiber rope insulation is less than 38mm;

(5) The low temperature equipment and piping in the wet environment are chosen for the insulation of the hydrophobic insulation material