Developed countries attach great importance
to the re-use of refractories from resources, environmental protection height
to understand, even with the development of laws and regulations strictly limit
emissions after the refractory, which greatly promoted the study of the
refractory recycling after refractory recycling rate has reached more than 60%
and rising.
Japan to scrap steel slabs based raw
materials, developed around the bottom of the ladle ramming mixes, ladle castable and styling products, such as: with 85% recycled material and 15% of
new material to produce a molten pool area with no burning furnace brick, with
90% recycled material and 10% new material to produce electricity lines slag
MgO-C, as well as all recycled materials to produce RH bottom burned magnesia
chrome brick. Secondary use of technology Kashima Steel has developed a skateboard
brick, using surface grinding, pouring castable recovery method, the Mosaic law
makes skateboard ring after the repair has reached a new skateboard using the
same effect; scrap iron ditch refractories are repeated use, primarily as
A12O3-SiC-C castable aggregate.
Italian company
has developed a method for recovering the refractory technology, mainly used
for recycling of the furnace , tundish , ladle ingot mold and the refractory
lining , and the recovered blowing directly into the furnace refractories to
protect the furnace wall . American Refractories previously only a small amount
of waste recycled , the rest almost completely buried. 1998 U.S. Department of
Energy , Department of Industrial Technology and steel producers jointly
developed a three-year plan to extend the life of refractories and refractory
waste recycling .Refractory Factory cooperation with users to minimize the
amount of the waste refractories . The United States also after dolomite brick as a soil conditioner and slagging agents were studied , and achieved
good results.
India conducted the first study of waste
refractories can be traced back to 1978, first in the steel company to carry
out, the use of Indian steel company (now known as TISCO steel Branch) high
alumina brick furnace waste generated (60% to 62% aluminum) production castable
(56% alumina), fire clay (50% alumina) and fire-resistant plastic. Developed
material which is mainly used for the production of cast burner tiles, dampers,
tiles, etc., and can meet the requirements within the industry.
没有评论:
发表评论