显示标签为“refractory binder;refractory product;refractorymaterial;unshaped refractory;”的博文。显示所有博文
显示标签为“refractory binder;refractory product;refractorymaterial;unshaped refractory;”的博文。显示所有博文

2014年8月19日星期二

Light and heavy division of alkali resistant castable refractory

Alkali resistant castable refractory in high temperature, resistance, alkali metal oxide erosion refractory called alkali resistant refractory castable. This kind of castable castable combined with ordinary calcium aluminate cement is similar, castableit is composed of a mixture of alkali resistant refractory aggregate and powder, binding agent and admixture. According to the environment and use condition of different alkali resistant castable refractory material, light and heavy division, and heavy and can be divided into temperature alkali resistant castable refractory and high temperature alkali resistant refractory castable.
  1. Light alkali used in refractory castable ceramic aggregates has alkali materials, porous clay clinker, scrap porcelain material, high strength and expanded perlite. Binders with ordinary calcium aluminates cement. Matrix castable refractory powder may be added to high-silica, refractory powderat an elevated temperature so as to react with the alkali metal oxides, the glaze layer is formed form a dense layer on its surface, to prevent the melt of alkali metal oxide further penetration and corrosion.
  2. Heavy Alkali temperature castable high alumina used in aggregate has guessed, clay guessed so on. Use of calcium aluminate cement binder plus silica microparticles, adding silica microparticles help to improve both the strength of castable combination also helps in use, castable lining impermeable layer formed on the surface, which is characterized by intensity and temperature considerable strength after drying, good alkali corrosion performance.

2014年6月20日星期五

Henan refractories enterprises should pay attention to the future bauxite resource allocation policy

Held in Henan Provincial Department of land and resources of the “province of important mineral resources integration and resource allocation policy advice suggestions forum”, to the government proposal mentioned: in the past, “bauxite to alumina key enterprise configuration, Refractory Fiber Boarddo not take account of the long-term, accounts for the refractories industry, the country’s first production, higher value-added for mine future demand”, “keeping coal, bauxite as our strategic resources”, “provincial development and Reform Commission approved the allocation of bauxite alumina enterprises and general enterprises, large enterprises (refractory alumina silica refractory material products with annual sales of X billion Yuan)”.
This information is for the refractory industry excited. Future bauxite resource allocation policy, although the government is not clear, but how to make good use of limited resources, good use in the steel blade, improve the added value of raw materials, to create greater value for society, this is the current production enterprises and Industry Refractory Materials Science and technology workers, should first consider the question,refractory brickand in future should bear the obligation and responsibility.
Refractory material is the basic material of all industrial furnace lining will use, plays an important role in the industry of green production, technological progress, energy-saving emission reduction, etc.. Henan refractory material industry has developed into a regional advantage industry, advanced technology, complete varieties complete; refractory accounted for 48% of the total output, and made important contributions to the economic development of Henan. In the Zhengzhou area of Xinmi, Gongyi, Dengfeng has become the local pillar industry. Henan refractory material industry is also an urgent hope that the government gives priority to the allocation of resources in the future bauxite.

2014年6月9日星期一

Refractory ramming material and its characteristics

Refractory ramming material is bonded granular material consists of very high proportion and the proportion of very low and other ingredients, even all the grain, powder material, to the strong pound bulk material to fight the way construction.

Because the ramming material is mainly used for direct contact with the melt, the grain, powder material must have high volume stability, compactness and erosion resistance, used for induction furnace should also be provided with insulation.
Bonded ramming choice should be appropriate, some without bond, some only add a small amount of flux. Acidic castable material commonly used sodium silicate, ethyl silicate, silica gel bonded, the dry ramming material with borate; alkaline ramming material used magnesium chloride and sulfate; often use carbon containing higher at high temperature can be formed with organic carbon and temporary binder. The dry ramming material and fluxing agent amount of iron. Chrome ramming material used to mount pin.

Other unshaped refractory materials compared with similar material ramming material, a dry or semi dry loose,
rely on the strong ramming to obtain compact structure, only the heating to the sintering temperature, the combination will have the strength. Castable refractory after forming, according to the characteristics of mixed hardening, adopt different heating methods to promote the hardening or sintering.


Such as containing inorganic chemical bond, self hardening reached a considerable strength after baking mould; containing thermoplastic carbon mixture, after cooling has considerable strength and release, before use should be rapidly heated and coking; without bond hardening at room temperature, often with a model for sintering in the ramming.

2014年5月29日星期四

Used for blast furnace lining in castable refractory material. It is a kind of containing silicon carbide and carbon of high alumina castable. Trough the castable lining was developed in the late twentieth Century 70 a new unshaped refractory materials, with the iron quantity, long service life, low consumption of refractory material, convenient construction etc...

Trough castables is mainly composed of high alumina, silicon carbide, carbonmaterials and binder prepared.

High alumina raw materials: the use of electric melting or sintering corundum spinel, bauxite clinker in one or two.

Silicon carbide materials: can choose one grade or two grade black silicon carbide.

Carbonaceous materials: the use of asphalt, coke, graphite or electrode powdered..

Binder: the clay, good dispersion of oxides or ultrafine powder and pure calcium aluminate cement.

Technical features: iron trough castable trench lining in repair without dismantling old lining, in the clear old lining surface residue and residual iron can be carried out after repair of casting, the old and the new ditch lining has good binding capacity, compared with the ramming material, waste is reduced by more than 50%, after repeated feeding, the total amount of iron. Up to 30 ~ 1000000t

2014年4月2日星期三

Application of graphite in the industry

Analysis of graphite, in addition to determination of fixed carbon content, it must also determine the content of volatile matter and ash at the same time.


Graphite is widely used in industry for the production of high-temperature smelting crucible on the industrial machinery lubricants,
making the electrodes and pencil; widely used in advanced refractory and metallurgical coatings industry, military industrial explosive materials stabilizers, light industry the pencil lead, carbon brush electrical industry, electrode in battery industry, fertilizer industry catalyst. Graphite after processing, but also to produce graphite, graphite sealing materials and composite materials, graphite products, high-technology refractory graphite friction reducing additives and other high-tech products, has become an important non-metallic mineral raw materials in various industrial sectors.

2014年3月24日星期一

Six bonding methods of refractory adhesive

  1. Hydration combined - agent reacts with water hydration hydration products generated at room temperature by means of a combination combined.
  2. Chemical binding - binding means between the agent and curing agent, binding agent and the refractory, or chemical reaction at room temperature or with heating to produce a chemical reaction which generates a compound having a binding agent binding effect.
  3. Polymeric binding - by means of a catalyst or a cross linking agent, the bonding agent is a poly condensation to form a network-like structure to produce bonding strength.
  4. Ceramic bond - means combining low-temperature sintering, which can be added in bulk refractory to reduce the sintering temperature refractory additives or metal powders, in order to greatly reduce the temperature of the liquid appeared to promote the solid-liquid reaction at low temperatures combine to produce low-temperature sintering.
  5. Cohere - rely on adding coagulant to make particles (colloidal particles) combine to produce condensation occurs
  6. Adhesive binding - is one of the following means of several physical effects arising from combining.
  • Physical adsorption: intermolecular interactions depend - van der Waals force binding generated;
  • Diffusion: the role of the thermal motion of molecules of the substance, the molecules are bonded with the adhesive composition of the diffusion interaction occurs forming a diffusion layer, thereby forming a strong bond;
  • Electrostatic interactions: the interface is bonded with the adhesive composition of the existence of the electric double layer by electrostatic forces arising from the electric double layer combination.



2014年3月22日星期六

Refractories industry accessing standards makes new progress

According to media reports, commissioned by the Ministry of Industry, China Association recently held refractories refractories industry access research forum, from China Association of Refractories, China mold material association representing public letter to the Office of Henan Province, and 50 large enterprises to explore developed on the refractory ore mining, industry access standards refractory materials, refractory products area.
Insiders said refractories currently facing overcapacity, industry access standards and promoting industry consolidation, improve resource utilization, and related listed companies will benefit.
In 2013, due to the decrease in the volume of orders, sales decline, cement, glass refractories enterprises compete to lower prices, payment defaults, resulting in refractories business funding constraints, some companies had to stop. China Refractory Industry Association on 52 producers of survey results show that in 2012 representing a decrease of refractories sales revenue of 4.29%, representing a decrease of 21.40 percent profit, trade receivables increased by 15.34 percent year on year.
Insiders said that the presence of resource exploitation of non-refractory industry standardization, waste and serious problem, especially blind investment and redundant construction led to the refractory industry from "structural surplus" to "full excess." And because the steel, cement, glass and other downstream industries refractory same overcapacity, profits have fallen sharply and other issues, the problem of refractory industry becomes more serious.
June 28, "to promote the progress of work in Henan refractories industry technical forum" in the new password, the meeting around the promotion of technical progress refractory industry expanded, the experts reached a basic views on the refractory industry standard enterprise 7 of 22 kinds refractory materials, 29 kinds of refractory products comprehensive energy consumption per unit of product limits and 34 kinds of refractory raw materials, product quality and technical standards were defined.

2014年3月20日星期四

Refractory binders classification

一、According to the chemical nature of the organic and inorganic binders.
  1. Inorganic binder:

  • Silicate - calcium silicate cement, water glass, clay, etc. combined.
  • aluminate - Ordinary calcium aluminate cement, calcium aluminate cement, aluminum, barium cement.
  • phosphate - phosphate, aluminum dihydrogen phosphate, sodium tripolyphosphate, sodium hexametaphosphate, chrome aluminum phosphate.
  • sulfate - magnesium sulfate, aluminum sulfate, ferric sulfate and the like.
  • chlorides - magnesium chloride, ferric chloride, aluminum chloride and the like. 
  • sols - silica sol, alumina sol, silica sol.

  2.  Organic binder:
  • natural organic matter - starch, dextrin, gum arabic, pulp waste, tar, bitumen, seaweed sodium.
  • organic synthesis - epoxy resins, novolac resins, resole resins, polystyrene, ethyl silicate, polyurethane resins and the like.

二、Sorted by hardening binders:
  • hydraulic binders - Portland cement, aluminate cement.
  • rigid gas-binding - sodium fluoride silicate, aluminum phosphate or dihydrogen phosphate plus magnesium oxide, silica plus calcium aluminate cement.
  • a thermosetting binding agent - phosphate, aluminum dihydrogen phosphate, resol resin.

三、Binding at different temperatures of the temporary and permanent binders.
  1. Temporary binding agents:

  • water-soluble binding agent - dextrin, powdered cellulose, carboxymethylcellulose, lignin sulfonic acid powder and liquid materials, polyvinyl alcohol powder crystals.
  • water-insoluble binding agent, - the hard bitumen, paraffin, polypropylene and the like.

 2.  Permanent bonding agent:
  • Carbon binding agent - tar pitch, phenolic resin.
  • aluminate cement.
  • silicate binder - sodium silicate, ethyl silicate and so on.
  • phosphoric acid and phosphate binders.
  • salts of chloride and sulphate binders.