Xinmi Changxin Refractory help you interpret frequency furnace ramming material errors, IF furnace ramming many people use when there are errors. For instance, some customers think IF furnace ramming such as quartz sand fight the charge should be done with white quartz sandlike material, there are considered to be more detailed the better, some say as long as the powder not others. These are the right frequency furnace ramming caused understand. Followed by some because of the fines that the furnace is good, it has been the use of fine material, but do not want to use a relatively coarse material. This is a misunderstanding.
Currently, the quartz sand in the end in what material is good? Changxin IF furnace ramming learned the most important need to look at several factors, one is the silicon content, which is the silica content, the higher the better refractoriness another, why are a lot of old customers are willing to adopt the red quartz sand it? Because red quartz sand high refractoriness, there is in addition to iron, at the time of entering into the mechanical quartziron easily processed, so the production of intermediate frequency furnace ramming sure when iron, or likely to cause wear oven phenomenon. As the ratio of quartz sand grains, the more detailed the better or the thicker the better. This should be a concrete analysis of specific issues. Also a ton of furnace, the thickness of the particle can be, as long as can be with a reasonable proportion. The main problem is a habit. As the saying goes: one-third of seven material use.
Whether even the best materials, if you hit a bad stove ovens, furnaces used in the same age is not high. Therefore, we use the time, Changxin IF furnace ramming what you suitable manufacturers, welcome to come to counseling. “http://www.yilongrefractory.com”
没有评论:
发表评论