Refractory brick most are used in the kiln, but for a long time are damaged, we need to replace it, and the change of refractory brick is not easy in the kiln, the need to pay attention to detail is very much, so today let technical personnel in Changing to tell you dig the refractory bricks need to understand knowledge.
First, when we replace the refractory brick new needs to the refractory brick broken down,
and then replaced with new, need to pay attention to in the refractory brick we had broken, to start from the weakest, then one brick at a time to take, but do not continuously down, when firebrick with broken to the attention of the kiln body around have loose phenomenon, if have loose would stop or the brick back, when not loose and take, this is what we in the patch kiln refractory brick inside need to pay attention to details.
and then replaced with new, need to pay attention to in the refractory brick we had broken, to start from the weakest, then one brick at a time to take, but do not continuously down, when firebrick with broken to the attention of the kiln body around have loose phenomenon, if have loose would stop or the brick back, when not loose and take, this is what we in the patch kiln refractory brick inside need to pay attention to details.
The second is when we place patching refractory brick alkaline, if the situation is not very good, we can consider replacing the whole site from tire, and so as to avoid distorting phenomenon appears in the repair time.
The content of the, need to know the details of when patching refractory brick you have some understanding of it, if you want advice on refractory brick more knowledge can consult us.
没有评论:
发表评论