2016年1月8日星期五

Open Egyptian Refractory Market with Our Best Sell Product — Silica Ramming Mass

refractory castableAs per invitation of Egyptian client, our sales manager and engineer went to Egypt on 4th December, 2015, and stay there for 2 weeks. Our clients steel plant is located in Giza city, about 1 hour far from Cairo. Out of space limit, our clients are using 3T induction furnaces now. They built the CCM in October and when our colleagues arrived there, the working condition was still very bad. Considering the heat consumption is very heavy when transporting melting steel from induction furnace to ladle and tundish, temperature of output melting steel should be as high as 1720-1740 degree centigrade. Sometimes the CCM did not work well, keeping melting steel temperature more than 2 hours was very frequent.
This client bought 24 tons of our silica ramming mass in November. This product is our best sell during the past year 2015, which is mainly designed for induction furnace. When we helped the client do lining for their induction furnace, we could only make the lining thickness as thin as 80/110/200mm. Under this hard condition, our silica ramming mass successfully reached 15 heats. Furthermore, this product is also widely used for building lining of tundish and ladle. If any interests, please do not hesitate to contact us. Our professional team will give you more details.
Await for your corporation!

2015年12月7日星期一

Technical Innovation of Carbon Brick for Blast Furnace Hearths

Possessing with the excellent corrosion resistance and high thermal conductivity which can lead to easily form a protective layer for blast furnace hearth, carbon bricks have been used as refractory material for hearths for more than half century.
fire brickTo further improve its performance, the refractoryexperts have carried out many investigations recently. Finally, they find out some main reasons which caused the damage. They are including as below.
1) The penetration of molten iron into pores.
2) Erosion due to direct contact with molten iron (dis-solution by carburizing).
3) Embrittlement of the material on hot side (loss of cooling capacity).
In order to enhance its corrosion resistance, the experts have developed new technology to get new refractory carbon brick through numerous experiments.
  • Add the aluminum oxide which has a good resistance to molten steel.
  • Reduce the pore diameter to prevent the penetration of molten steel and other impurity items.
  • Enhance the high thermal conductivity to reduce the surface temperature.
  • Add the TiC to improve the corrosion against molten steel, increase its viscosity and slow down the flow which could effectively reduce the damage on carbon brick.

2015年12月3日星期四

The Best Refractories for Induction Furnace — 25+ Heats Silica Ramming Mass

In recent years, silica ramming mass is widely used in induction furnace. Compared with traditional refractory lining material, this product is of lower cost, shorter sintering time and castable  refractorybetter working condition.
To offer clients better refractory products, we have successfully developed our 25+ heats silica ramming mass. As per actual working, we summed up the material consumption as following.
  1. First heat: 10-15mm
  2. Rest heat: 3-5mm
As per our experience, we should leave 70mm as save level. So if the
lining thickness is 180/300/450mm, we could promise the least service life of ourrefractory fire brickmaterial to be 25 heats. If the working condition is convenient, 30-40 heats is no problem.
Furthermore, our silica ramming mass can also be applied in tundish and ladle. Service life can namely be 48-60 hours/ 200+ heats.
Because of the great advantages as above, our silica ramming mass is very welcomed by our clients all over the world say Bangladesh, Ghana, South Africa, and Indonesia, etc. If more interests, please feel free to make us informed, our professional teams are ready to give you our reliable service. For new clients, we would offer more preferential as following.
  1. Lower price trial order
  2. Professional refractory technicians overseas service
Therefore, what are you waiting for? Take your phone and contact us!
未命名_meitu_1副本

2015年12月1日星期二

How to distinguish the quality of the refractory brick

In general, according to the contents of various chemical compositions and their functions, it is divided into three categories, which are the main components, impurities, and the added ingredients.
firebrickThe main component of the refractory brick is the majority of the material, the high temperature properties of the chemical composition of the decisive role. Refractory brick why can have excellent resistance to high temperature, and many refractory materials and characteristics? Completely or basically according to the contents of various chemical components in the refractory materials and its role, usually the main components, impurities and the composition of the three types of.
Impurities are those in refractory material in different principal component, content of fractional and high heat resistance properties of the refractory often bring the harm of chemical composition. This chemical composition is mainly composed of the raw material in the entrainment and come.
The main component of the refractory brick is the majority of the material; the high fire brick temperature properties play a decisive role in chemical composition. Refractory brick has good resistance to high temperature performance, as well as many refractory materials and their own characteristics, completely or basically depends on the principal components. Therefore, the main ingredient of refractory materials must be fully paid attention to. Usually on refractory materials according to the chemical composition and classification, and on many of the same material refractory material is divided into several levels, is mostly according to the main components of the kinds and content of the amount. Can be used as refractory materials are main components with a high melting point high lattice energy or high temperature decomposition of elements or compounds.
The price of refractory brick should be determined by the type of refractory brick, which is based on the type of output and the type of refractory brick.

2015年11月24日星期二

High temperature compressive strength of refractory

The high temperature compressive strength of refractory materials is the maximum pressure that can be under at high temperature of 1000~2000, which is expressed by N/mm2. Thefirebrickcompressive strength of refractory materials is obviously changed with the increase of temperature. When the temperature rises from the constant temperature, the temperature decreases linearly with the increase of temperature. Since then, some of the material is still with the temperature rise and continue to fall; some when the temperature rises to a certain range, then with the temperature rise and rise, and at a specific temperature to give the highest value, followed by a sharp decline.
The change in the high temperature and pressure strength of the refractory products is controlled by the change of the matrix or the combination of the matrix or the combination of the material in the material. In general, composed entirely of crystal sintered refractory materials, due to high temperature which grain and grain boundary prone to plastic deformation, especially when the loading rate is easier to produce plastic deformation, so the strength with increasing temperature decreases. When some of the crystalline phases or thefire brickphases of the crystal phases melt at high temperature or form a molten body, the intensity of which is often intense. When the refractory materials except contain crystals, also contains a certain amount of glass phase, such as brick, clay brick, high alumina brick, the matrix is mainly composed of a glass phase composition, with the increase of temperature, such multiphase material strength due to structure decreased with the temperature changes. However, when the temperature is further improved, the viscosity of the glass phase is changed from brittle to strong toughness, so that the material particles can be combined more firmly, so that the strength can be improved obviously. Then, when the temperature continues to raise, the viscosity of the melt decreases sharply and the strength decreases sharply with the melt viscosity. When the refractories contains a certain amount of change with temperature, the strength of the product will be corresponding to the temperature increase.

2015年11月18日星期三

Introduction and usage range of refractory clay

Also called fireclay refractory mud or joint material. Supplementary materials for masonry of refractory products.
炮泥According to the material can be divided into clay, high alumina, and silica and magnesia refractory mud. Made of refractory powder, binder and additive. Almost all of the refractory raw materials can be used to prepare the powder used in the preparation of refractory mortar. With refractory clinker powder and appropriate plastic clay as binder and plasticizer and made called common refractory mud, low room temperature strength, high temperature formed ceramic combination has a higher strength. The combination of water hardness, gas or heat, as the binder of the binder, known as the chemical combination of refractory mud, in the formation of a certain chemical reaction and the formation of a certain chemical reaction. The granularity of fire resistance varies according to the use requirements, its ultimate size is generally less than 1mm, and some are less than nozzle0.5mm or more.
Selection of refractory mortar material, should be considered and the masonry of the refractory products consistent. Refractory clay addition
The coating can also be used as a protective coating for the lining of the material.
Characteristics and application of refractory clay: 1, good plasticity, easy construction, 2, bonding strength, corrosion resistance, 3, fire resistance, 50, 4, 1650, anti slag, good invasion; 5, thermal spalling. Refractory mud is mainly used in coke oven, glass furnace, blast furnace, other industrial furnace.
The industries are: metallurgy, building materials, machinery, petrochemical, glass, boilers, electric power, steel, cement, etc…

2015年11月10日星期二

How to avoid the problem of the use of refractory brick in the gasifier

Refractory brick in the running process of the gasifier has also occurred in oxygen loadfire brick fluctuation and sometimes oxygen control valves will be caused by the variation in oxygen load, sometimes large particles will suddenly stuck valve of high-pressure coal slurry pump, slurry
flow suddenly dropped caused by the amount of oxygen relative excess. Oxygen fluctuations directly after temperature fluctuations caused by oxygen, the fluctuation range is 500m3 ~ 600m3 sometimes, reaches a maximum of 1000m3. After the sudden rise in oxygen, resulting in a sudden rise in temperature suddenly burnt under high temperature thermocouple. This situation of refractory brick influence is big, should be avoided as much as possible. First of all, we all know that the furnace temperature is very important to the life of the refractory lining, so it should be strictly controlled not over temperature. Under normal production conditions, the surface of refractory bricks have a layer of coal layer, in fact, slag layer is dynamic, low temperature slag layer is thick, the high temperature slag layer is thin, the appropriate thickness of slag layer can slow erosion refractory Brickof high temperature gas and slag.
Coal water slurry gasifier of refractory brick requirements than to heavy oil stove of raw materials requirements of refractory brick is much higher; the main reason is the slag on the refractory penetration and corrosion. The replacement of the firebricks that penetrate the thickness of 10mm ~ 20mm, penetration, and its strength decreased obviously. High temperature erosion intensified. According to introduce the relevant information, especially the operating temperature more than 1400 DEG C when etching effect is increased exponentially, so in daily operation, often pay attention to the temperature changes, timely discovery and deal with the problem, security of refractory bricks use period and number of times, is very effective to reduce the cost.

2015年11月4日星期三

Analysis of the optimization and upgrading of the refractory industry in the present economic situation

Refractory material is a kind of inorganic nonmetallic materials with no less than 1580, but only the degree of fire resistance can be defined as a comprehensive description of the refractory, and 1580 is not absolute. Is now defined as the physical and chemical properties firebrickwhich allow the use of materials in high temperature known as refractory materials. Refractory materials used in steel, nonferrous metals, glass, cement, ceramics, petrochemical, machinery, boilers, light industry, electric power, military and other fields of national economy, is to ensure that the operation and technical development of the above basic materials, plays an important role in the development of high temperature industrial production.
With “Ten Three Five” period, China to speed up eliminating backward and high energy consumption capacity, industry will focus on the development and promotion of new energy-saving furnace, comprehensive energy saving technology development, to carry out energy management, “three wastes” emissions control and the “three wastes” resource recyclingfire brickutilization. Commitment to use refractory material resources and reuse, reduce solid waste emissions, improve resource comprehensive utilization rate, and comprehensively promote the energy-saving emission reduction.
The refractory material industry development policy, “pointed out that China Iron and steel industry unit consumption of refractory materials about for each ton of steel consumption about 25 kilograms, by 2020 fell to less than 15 kg. In 2020, China’s fire resistant materials have a higher life, more energy saving, no pollution and functional products. The products meet the needs of national economic development, such as metallurgy, building materials, chemical industry and other industries. At the same time, the development of high temperature industry to promote the technology progress and industrial upgrading of refractory materials industry, the continuous development of refractory materials enterprises also put forward higher requirements

2015年10月27日星期二

Air permeability of refractory

Air permeability is the performance of the material under the pressure difference to allow the gas to pass. Because gas is through the material through the hole through, the permeability and the size, quantity, structure and state of the hole, and with the direction of the pressure offire brickrefractory products. It has a relationship with porosity, but has no regularity, and it is different with different porosity. On some refractory materials, air permeability is very key indicators, a direct impact on the corrosion medium such as erosion of slag, liquid steel, iron and a variety of gas (steam), antioxidant, and the ventilation function. For some materials, such as for isolation flame or hot gas or direct contact with the slag and molten metal products, with its very low permeability; and some functional materials, must have a certain degree of aeration. The air permeability of refractory is directly influenced by the process of production. By controlling the air permeability of the material, the air permeability of dense shaped refractory products is controlled by controlling the ratio of particles, forming pressure and firing system. The standard GB/T3000-1999 (equivalent to international standard ISO8841: 1991) is determined by the national standard.

2015年10月22日星期四

Material used for magnesium alumina refractory

Materials — magnesia, high alumina clinker and zircon sand were used Meilv refractory clinker. In the calcined materials, is now the end of their physical and chemical changes, magnesia firebrickalumina refractory ball during sintering and Al2O3 in magnesia MgO and high alumina clinker will generate magnesia alumina spinal and its formation temperature began to 800~10001200~1300 DEG C to generate speed to accelerate, 1500 to 1600 DEG C and the production rate of up to 95% near the end. Therefore magnesium refractory ball in firing in the physical and chemical changes is relatively simple, only mg Al spinal formation and again present in liquid phase, dissolved attack, crystallization, crystallization, crystal growth with large length and, at the end of the sample reaches the sintering.
Magnesia refractories if in the down draft kiln firing, understanding high fever to temperature 1500~1580 DEG C insulation time for 12 ~ 15 h, in the kiln to weak oxidizing atmosphere.refractory brick
Magnalium refractory material in the kiln internal use brick scaffolding, in brick frame with mg Al ball billet should be using neutral kiln sand separated, to echo each other anti firing.
High pressure forming of magnesia refractories in stomata rate, compressive strength, heat capacity of expensive, heat conduction rate, thermal stability and load softening temperature etc. function than shapes technology of (i.e. low or medium pressure to form a ball) magnesia alumina refractory ball to winning more. Magnalium refractory material especially in high temperature, thermal shock, volume density, thermal storage ability is better than aluminum ball. Therefore in the magnesium ball furnace to medium-sized, large ball can replace the aluminum ball.

2015年10月16日星期五

How to evaluate the density of refractory brick

With the continuous development of China’s cement industry; higher requirements for fire resistant materials are also put forward. Long term dependence on the extensive economic growth mode of the refractory industry, should be increased to adjust the intensity of the need refractory blockto adapt to the new situation, then in the purchase, we should be how to determine the density of fire bricks, and hope that the following text will help.
Refractory brick is a rich in hydrous aluminum silicate siliceous clay and has the capability of high temperature deformation, not broken, do not soften and not paste, refractory bricks in the amorphous material department, there are a variety of consumer products, the basic quality requirements of alumina is higher than 38% and low iron and low content of alkali metal. These products can be claimed or calcined, such as refractory clay, overloaded with plastic material, high alumina plastics, fireclay and high alumina pouring material and the other. Different quality mud with different appliances, cement with clean water, accurate weighing modulation, uniform mixing.fire brick
If is already a good tune mud, it shall not be arbitrarily diluted with water and mortar plumpness to greater than 95% above to ensure dense refractory brickjoints, surface brick joints to puree pointing, housing cannot correct position with mud is looking. Bricks with a certain shape and size, weight per unit volume, density, that good compactness and strength is likely to be, also called high temperature load to deformation temperature, called heavy firing line changes or called residual line change, refers to each in the same temperature changes in volume expansion and contraction of the change, high temperature resistant, about 1800 degrees, refractoriness under load in 1620-1640, low coefficient of thermal expansion.

2015年10月13日星期二

How to choose the different parts of the refractory lining of blast furnace

In the process of production and in the selection of various parts of the refractory lining, should follow the principle is: the refractory lining to correspond to the parts of the heat flow intensity, to keep under the impact of strong heat and lining can still maintain the continuity and stability of the cone. Each part of the refractory brick selection method is:
refractory brick(1) Furnace throat. The main burden to withstand the impact and abrasion, generally used steel brick or water cooling steel brick.
(2) The upper shaft. Analysis of reaction of carbon 2CO2-CO + C easy happening areas is the site and alkali metal, zinc vapor erosion also occurred in this area. Plus the burden descent and ascending gas flow of scour and wear. Therefore, we should choose resistance to chemical erosion and abrasion resistance of refractory materials, the most appropriate is high relative density brick, high density, high aluminum brick or phosphoric acid impregnated clay brick.
(3) And lower body in the belly. The main mechanism of damage is thermal shock, high temperature gas scouring, alkali metals, zinc and carbon deposition, and chemical erosion of the initial slag. Should the lining refractory material thermal shock, resistance to slag erosion and erosion protection.
1000m3 and the following blast furnace can be used for aluminum carbon brick.
(4) Bosh. Hot gas erosion and iron slag erosion is the main reasons for the damage, this part of the heat flux intensity, refractory material life not long (as long as 1-2 months short 2-3 weeks), generally used in refractory degree is high, load softening temperature is high and the volume density of refractory material, such as the high aluminum brick, alumina carbon brick.firebrick
(5) Hearth tuber. This site is only in blast furnace of oxidation reaction area, high temperature up to 1900~2400 DEG C, lining by damage caused by high temperature thermal stress. Composite brick masonry hearth tuyere zone is adopted by the modern blast furnace, material for high alumina, corundum Mo mullite; corundum and silicon nitride combined silicon carbide, useful also hot pressed carbon block.
(6) The lower part of the hearth and bottom. The high thermal conductivity, resistance to penetration of high, resistance to chemical attack high, porosity, micro aperture of hot pressing small carbon bricks, micro porous carbon brick, hot semi graphite carbon brick and ceramic cup brown corundum or gray corundum brick etc. by this part of the refractory material. Taphole area work condition is bad, now the hearth refractory material matched with iron composite brick masonry, used in the production of carbonaceous, semi graphite G-Sic, Mo mullite, SiC material.

2015年10月9日星期五

Characteristics of refractory brick

Refractory brick is made of refractory clay or other refractory raw materials. Light yellow or brownish. Refractory brick is a refractory material with a certain shape and size. According to fiberthe preparation process to divide can be divided into firing brick, brick, electric melting brick, and refractory insulating brick; according to the shape and size can be divided into standard brick, brick, and type specific brick.
Refractory bricks can be used as building materials and structural materials for building furnaces and various thermal equipments, and can be subjected to various physical and chemical changes and mechanical effects at high temperatures. For example, refractory clay brick, high alumina brick, brick, brick etc… Refractory brick is one of the most widely used products, so it has the characteristics of what kind of it?
1, chemical composition: the main components of the quality and characteristics of the decision to fire brick.
2, bulk density: the unit volume weight, the density is big, that the fire brick density is good, the intensity may be high, but the thermal conductivity may be big.
3, apparent porosity: no specific requirements, but as a refractory brick manufacturers mustfirebrickstrictly control the apparent porosity.
4 and refractoriness under load: also called high temperature load to deformation temperature, this parameter is very important, resistance to high temperature resistance of refractory bricks.
5, thermal shock resistance: resistance to temperature changes and not the ability to destroy.
6, the compressive strength: bear (normal temperature) the maximum pressure capacity of 7, flexural strength: the ability to withstand shear stress.
8, linear change rate: also called reheating linear change or residual line change, firebrick every time at the same temperature production quality.

2015年9月24日星期四

How to use refractory bricks to build a drying machine

Drying machine trough, most of the use of iron trough, due to iron chute under the high temperature environment and the material erosion, often corrosion and sealing refractory Brickoff, not only affect the production and not easy to maintenance, especially using boiling furnace factory is obvious). The Henan Changxing refractories factory is proposed under the trough using refractory brick masonry, and achieved good results, for reference.
Masonry materials: there are generally two kinds of refractory brick (T – 3, T – 19 or T – 38).
Masonry method: in the furnace near the dryer section, the center line of the dryer is a center, a small hole, the hole of the width, height and length of the drying machine feeding port size to determine the size of the. As with diameter of 1.5m x 12m drying machine, for example: the machine into feed inlet diameter 1000mm, this hole width desirable 800mm, hole height for into the outlet of 2 / 3 length from the drying head count, brick is the dryer in the rotation can’t touch bricks as the beginning. Hole pier to furnace direction extending about 800~1000mm. It into a small hole, hole at the center of the above built a tilted 45 degrees, 300mm wide groove can be in again. During the production, from the conveyor to the top notch pipe butt on it.
The results show that the use of refractory brick masonry dryer material tank has therefractory brick following advantages:
The high temperature, compressive strength, corrosion.
After the II masonry, brick almost to the outer edge of the dryer are all covered, drying head is not easy to burn, deformation, and prolongs the service life of the dryer.
(3) The fire heat and energy concentrated walk toward the middle, eliminate the air leakage and material leakage phenomenon, the flame in the hearth into the drying machine is very far.
Also such masonry method and on into the air without any effect, but without anything blocked, the slot into the fire hole effect is more ideal. The transformation of this groove is less; l ~ 2d can be completed.

2015年9月18日星期五

Refractory material for petrochemical furnace

(1) Refractory materials for carbon black fuel furnace. In order to improve the production efficiency and the reaction degree, the reaction temperature must be increased in order to improve the production efficiency and the reaction temperature. If you want to produce hard 04-2[1]carbon black, you must also improve the reaction temperature. In particular, the production of long life, rolling wear small tires will need a more rigid carbon black, the reaction temperature of 2000 ~ 2100, which requires more than the refractory.
(2) Slag gasification device. It is well known that the gas industry is widely used in refractories. The operating temperature and pressure of the refractory material used in the gasification equipment are extremely harsh, and the operation temperature and pressure are high: the slag belongs to the acid slag which has very strong corrosion resistance. At the same time, there is a highly corrosive gas. Refractory materials used for high resistance to acid slag corrosion can be used to obtain high life.
(3) The oil cracking unit: the operating conditions in the catalytic cracking unit are the most refractory brickdemanding operating conditions, including high temperature and high pressure. The refractory lining of the catalytic cracking unit is required to have high wear resistance and low thermal conductivity so that the two contradictory properties. Because of the high wear resistance generally requires high density, and low heat conduction rate generally requires a lower density, so it is needed to introduce the two properties of the material and its related problems.
This chapter mainly discusses and analyzes the fire resistance of these special applications in the petrochemical industry, and provides the basis for the development and application of the relevant refractories.

2015年9月15日星期二

Brief introduction of refractories for blast furnace iron making

Blast furnace is the drum into the air the coke burning and reduction shaft furnace of ore smelting, is in high temperature and reducing atmosphere continuous iron making thermal equipment. In the last 20 years, the development of the global iron making technology is very fiberfast, and the blast furnace is becoming more and faster. Nowadays, the life of blast furnace has been more than 15 years, the longest of which has reached more than 20 years. A new generation of service life of blast furnace will reach more than 20 years. With the furnace body design more reasonable, blast furnacerefractory materials are also continuously being developed and applied. Blast furnace lining refractory material needs more than any other process in the production of iron and steel. Refractory material to withstand high temperature thermal shock effect, wear and erosion of furnace charge, gas, the erosion of alkali metal, bosh following by molten iron and slag erosion, erosion. Therefore the problem of lining must be comprehensive consideration of various factors, selected according to the different parts of the cooling system of the furnace body and the different materials of the refractory material. In short, the selection of new high quality refractory materials is one of the important measures to prolong the life of the blast furnace.
The furnace body comprises a furnace body, bosh, belly, throat, hearth and bottom parts etc…refractory Brick The furnace with air, slag hole, taphole, cooling system and gas collector and charging device etc… Development trend of blast furnace refractorymaterials
Preparation and properties of refractory materials is an important aspect of the improvement of blast furnace lining system. With the increase in production of blast furnace, furnace lining refractory system should be able to withstand the severe wear. Lining refractory system is mainly to prevent high temperature chemical erosion and carbon bricks and iron directly contact erosion or melting loss. In any production conditions, to prevent lining cracks is the first step in the establishment of the good effect of lining system, the high temperature gradient and no enough space for expansion are two main reasons that cause cracks, reasonable preparation lining can prevent or reduce the cracks.

2015年9月10日星期四

Production process of high alumina brick

It is well known that high alumina brick is one of the most widely used refractory materials, and high alumina bricks and clay bricks are the same as the basic same method. The process of fire brickcrushing, mixing, molding, drying, sintering, and testing, packaging, etc.. The production practice shows that the high alumina clinker in the crushing before the strict selection and classification, low temperature and its pressure to withstand a good but high temperature, a slight reduction in the kiln, and the 1 meters, while the silicon brick can be as high as 1.7 meters. There are only some process parameters to be different. And classification of storage using bauxite and clay together with fine grinding method can improve the quality of products.
Raw materials and technology: mineral mainly consists of Mo mullite and corundum phase and blast furnace with corundum mullite brick using artificial electric melting or sintering corundum and Mo mullite raw materials as the main raw material, through high pressure shaping and high temperature sintering, mineral mainly consists of mullite. Features: the 04-2[1]products have apparent porosity rate is low; load softening point, high creep resistance and chemical corrosion resistance excellent characteristics. Features: the product has the appearance of white, size accurate, with excellent high temperature physical properties and resistance to chemical erosion. Uses: mainly used for blast furnace bottom and hearth, is one of the advanced large blast furnace and ceramic cup material.
High alumina brick and clinker clay brick production process is similar differences. Uses: large blast furnace with advanced ceramic cup “one of the materials and hot blast stove industrial furnace in high-grade refractory material can be used. Raw materials and technology: blast furnace with mullite brick using artificial electric melting or sintering Mo mullite raw materials as the main raw material, through high pressure shaping and high temperature sintering is ingredients in a higher proportion of clinker can be as high as 90% ~ 9% clinker before breaking for classification is chosen, screened in addition to iron firing temperature is higher, such as high alumina brick tunnel kiln firing average 1500 ~ 1600 DEG C.

2015年9月7日星期一

Requirements of refractory materials for blast furnace lining repair

Furnace lining maintenance method generally speaking, there are grouting lining, cold spray technology, furnace shell hole opening technology and remote control technology.
refractory castableGrouting lining technology can be widely used for the focus of a short-term fix shaft and Bosh area. It is a means of prolonging the life of, but must be in certain conditions repeat construction to maintain the thickness of the lining. Different furnace body parts of the use of refractory materials are also different, the pressure of mud to the success of the grouting technology is crucial.
The advantage of cold spray technology is that the inner wall of blast furnace can be cleaned thoroughly. And can make the bond between old and new refractory materials is better, and it can form well lining structure, make the blast furnace smooth, but the technology has the shortcomings of long time-consuming.
The furnace shell hole with the lance gunning is commonly used in the damaged lining furnace shell holes, with a lance from the outgoing furnace damage parts of spray repair. This methodcastablecan be used to spray up speed, and the short time is short, but it is only suitable for the local damage.
Remote control is the use of the advanced technology in the development of blast furnace at home and abroad in recent years, remote control need time is short, wide range, but the technical control complex.
Grouting lining technology requirements of refractories consistency must be appropriate, for cold spray repair, furnace shell hole using guns gunning and remote control gunning, refractory materials under high temperature and normal temperature attachment is good, can continuous rapid formation of a certain thickness of coating layer, spray coating tightly bond into a dense and do not fall off, fast drying and warming.

2015年8月31日星期一

What is the high aluminum cement castable

The main mineral of high alumina cement as calcium aluminate (CA), the hydration speed, and precipitation of calcium hydroxide. Therefore, high alumina cement prepared with the characteristics of the fire resistance of the fast hardening and high strength. Fireclay and high castable  refractoryalumina clinker or with the same material waste refractory bricks, which is normally used in refractory aggregate and powder material, the maximum temperature for 1400 DEG C. Under normal circumstances, high alumina cement dosage is about 15%. When the temperature is high, it should be used to reduce the amount of cement, at present, the amount of cement in low cement pouring material is reduced to about 3%, so that the content of cement and powder is kept at about 30%. The refractory powder plays a role of filling in the pores of the aggregate and participating in the solid phase reaction at high temperature. Therefore, it is required to be as thin as possible. The varieties shall be in the same or slightly better aggregate, and shall not be used in place of the refractory mortar fire brickmaterials. The refractory need to be chosen according to the different service temperature, should not one-sided pursuit of high grade material, to turn material resources to good account. The maximum particle size of the refractory aggregate is generally 15mm. When the temperature is high, the particle size can be reduced. The particle size distribution of aggregate, usually used in the two grade ingredients, can also be used in the same material, the sand rate is generally 0.45~0.55 to control. Water quality can be expressed as a percentage of the amount of water, and it can be expressed as the amount of water to be used to be used to say that the amount of water in a water cement ratio or the. But the general principle is: in the case of the fire resistance of the mixture and the workability, should try to reduce the use of water. In addition, high alumina cement refractory pouring material can also be mixed with additives (such as water reducer, etc.) in order to improve the construction performance and improve the fire resistance.

2015年8月26日星期三

The reason for surface cracks of refractory bricks after used a period of time

Although the fire brick is good, the structure is relatively stable, but the  refractory  brick used for a period of time, some customers reflect the surface of the refractory brick cracks, which is what causes it? After many years of research and experience, the main reason is that the fire bricksurface of the refractory brick is four points. Today’s technical staff for you to read.
1, the raw material itself is dry and sensitive coefficient
The drying coefficient of raw material is the possibility of cracking of the product, the higher the drying coefficient is, the more easily the product is cracked, the lower the coefficient is, and the more difficult the product is. So we must be careful when choosing raw materials, as far as possible to choose dry sensitive coefficient of raw materials.
2, inappropriate production measures
Production without attention to the ratio of raw materials, if the mix is not uniform will cause fire brick the product crack, which requires us to pay attention in the production of the source, to avoid cracking in the future.
3, dry reasons
The air temperature is too high, and the furnace preheating is too short and the ventilation quantity is too large, so the reason of the crack is caused by the fire.
4, roasting reasons
A gate is not reasonable, the fire cooling too fast, too fast, will lead to uneven heating, it will cause cracks in refractory brick.
Above brick appear on the surface of the crack by Xinmi Changxing refractory to provide you with, more on the refractory brick consulting; please pay attention to our website.